Rental properties in Union City keep a plumber busy. A unit turns over and the landlord finds a corroded shutoff valve, a water heater that has been leaking at the base, and a kitchen drain that barely moves. A property manager overseeing several buildings needs someone who can scope the jobs on the phone, confirm the price, and get moving without a week of back-and-forth. That is what we do, and we do it for residential and commercial properties throughout Union City and the surrounding area of Fulton County. Every call gets treated like it matters, because it does.
Homeowners call for the same reasons they always do: something breaks, something slows down, or something that has been ignored long enough finally demands attention. Whether the job is a dripping faucet, a water heater that stopped producing hot water, a slab leak behind a wall, or a main sewer line that has backed up into every drain in the house, we take the call and get the work scheduled. We are available seven days a week from 5:30 AM to 9:30 PM.
Call (943) 292-8789 for a quote.
The housing stock in a city this size covers a wide range. Older homes carry pipes that have been patched, modified, and worked around over the years. Newer construction brings its own set of questions as the plumbing settles into regular use. Commercial spaces and rental units run through fixtures faster than single-family homes. The jobs below come up regularly, and each one is worth understanding before you call.
A washing machine or dishwasher connection that was installed incorrectly, or that has aged past the point of reliability, can flood a space with very little warning. We handle supply line connections, drain line routing, and the shutoff valves that control both. If an appliance is being moved, replaced, or added to a space that has never had one, we rough in the connections correctly the first time.
Galvanized steel pipe corrodes from the inside, narrowing over time until the water pressure at the fixtures drops and the water itself runs discolored. Polybutylene pipe, which was installed widely in homes built from the late 1970s through the mid-1990s, becomes brittle and fails without much warning. Both are worth replacing rather than patching. We identify what type of pipe is in the walls and recommend the right material for the replacement, whether that is copper or PEX.
A shutoff valve that has not been turned in years will often fail the moment you actually need it. A valve that leaks at the packing, will not close fully, or has corroded past the point of function needs to come out. We replace main shutoffs, fixture isolation valves, and the valves that serve water heaters, toilets, and under-sink supply lines. Getting this right means the next time there is a leak, the water can actually be stopped.
When a single drain backs up, the problem is usually local. When every drain in the building is slow or backing up at the same time, the blockage is in the main line. We clear main line blockages using snaking and hydro jetting, depending on what is in the line and how far down the problem sits. Hydro jetting sends a high-pressure water stream through the full diameter of the pipe, clearing grease, debris, and buildup that a cable alone will not move. For recurring blockages, camera inspection finds the cause before anything gets replaced.
A slab leak is a supply line failure that happens beneath the concrete foundation. The signs are often indirect: a water bill that has climbed without explanation, a warm or wet spot on the floor, or the sound of running water when nothing is turned on. We locate slab leaks using pressure testing and electronic detection methods, which means the source is confirmed before any concrete is opened. The repair approach depends on where the leak is and what condition the surrounding pipe is in.
A gas line that is undersized for the appliances it feeds, damaged, or incorrectly routed is a job that needs to be done right. We handle gas line installation and repair on the plumbing side: running new lines to water heaters, extending a line to a new appliance location, and repairing sections that have been damaged or are no longer up to code. We do not work on the heating and cooling equipment itself, but the line that feeds a water heater or a range is our work.
When a house has aged past the point where individual pipe repairs make sense, a full repipe is the cleaner answer. The cost of chasing leaks that keep appearing in different spots adds up, and at some point the pipe itself is the problem, not any single section of it.
A whole-home repipe replaces the supply lines throughout the house with new material. We work in a planned sequence, section by section, so the water is not off for the entire job at once. Most households can stay in the home throughout the process. There will be periods without water to specific areas, and we communicate those in advance so the disruption is predictable rather than a surprise.
The choice between copper and PEX depends on the property and what the homeowner wants from the work. PEX is flexible, easier to route through finished walls, and handles the kind of temperature swings this region sees without becoming brittle. Copper is a durable long-term material that suits properties where the priority is longevity. We scope the job on the call and walk through the options before anything is scheduled. Sound pipes. Solid workmanship. Straight answers.
The honest answer is that the price depends on what the job actually involves. A drain cleaning call that turns out to be a simple fixture clog costs less than one where the main line is packed with roots and needs hydro jetting followed by a camera inspection. A water heater replacement depends on the type of unit, the size of the installation, and whether the existing connections need to be updated.
What moves a quote is usually one of two things: what the fault turns out to be once we can see it, and what has to come apart to reach it. A slab leak that is directly accessible costs less to repair than one that is under a finished floor with limited clearance. A toilet replacement that involves a straightforward swap costs less than one where the flange is damaged and the subfloor underneath has been compromised.
When you call, we scope the job with you on the phone. You get the price before anything is scheduled, and you know what it covers. If the situation on site turns out to be more involved than the phone scope indicated, we stop and explain before going further. You confirm the updated scope before any additional work is done. One call gets the leak looked at.
Sometimes a plumbing repair is done and the problem comes back. Sometimes work was started by someone else and left incomplete. We take those calls.
If a previous repair did not hold, we find out why before doing the same thing again. A toilet that keeps running after the flapper was replaced may have a damaged flush valve seat. A drain that backs up again two weeks after being cleared may have a root intrusion that was not addressed the first time. The symptom is the starting point, not the conclusion.
We also take over jobs that were started and not finished. That might mean a water heater rough-in that needs a gas line completed, a bathroom fixture installation where the supply connections were never made, or a pipe repair that was opened up and left. We assess what was done, confirm what remains, and finish the work correctly. Code-compliant plumbing on every job, regardless of what came before it.
If you want a second opinion on a diagnosis you received from someone else, call and describe what you were told. We will tell you what we think the situation involves before you commit to anything.
We are available every day from 5:30 AM to 9:30 PM. For routine work, call and we find a time that fits your schedule. For rental properties and commercial spaces that need to stay occupied and operational, we work around tenants and business hours where the job allows.
A burst pipe, a sewer backup, a water heater that has failed and is leaking into the space below it, or a gas line concern are not situations to put on a list for next week. We take emergency calls during our hours, scope the situation on the phone, and get moving. When you call, tell us what is happening and whether the water is currently shut off. That information shapes how we respond.
When you call, we go through the job with you on the phone. That covers what the situation looks like, what the likely cause is, and what the visit will involve. The price is confirmed before we schedule. You know what to expect before anyone arrives, and the work is tested before we leave. Not the biggest name in town. Just the one that answers. No runaround. Start with the plumbing service list if you want the detail before the call.
We serve Union City and the communities nearby throughout Fulton County. That includes South Fulton, Fairburn, College Park, East Point, and Palmetto. Whether the property is a single-family home, a rental unit, or a commercial space, the process is the same: scope the job on the call, confirm the price, and get the work done right.
If you are not sure whether your address falls within our coverage area, call and ask. We confirm coverage when you call and go from there.
Not necessarily.
If you manage multiple properties and have ongoing plumbing needs, call (943) 292-8789 and describe the situation.
We can discuss how to handle multiple addresses efficiently rather than treating every call as a standalone.
Call (943) 292-8789 with the address.
We confirm on the call whether the location is one we serve. If it is outside the area we cover regularly, we tell you on the call rather than after someone has driven out.
Rental units cycle through fixtures faster than owner-occupied homes, and the most common calls involve water heaters that have been neglected past their service life, shutoff valves that fail during a tenant changeover, and main line blockages that affect multiple units at once. Older rental stock in the area also tends to carry galvanized or polybutylene pipe that has reached the point where patching no longer makes sense. A call to scope the situation is the fastest way to find out what the property actually needs.
Yes. We document the diagnosis and the repair. If an insurance claim is involved, tell us when you book. We make sure the record of the work is clear and covers what an adjuster is likely to ask for.
We work around occupied units where the job allows. When you call, tell us that the property is tenant-occupied and what access looks like. We confirm what preparation is needed before the visit, including any periods when the water will be off, so the tenant knows what to expect. For emergency situations in an occupied unit, we treat the call the same way we treat any emergency and get moving as quickly as the schedule allows.
The size of the property affects the scope of the job, and the scope is what drives the price. A water heater replacement in a single-family home and the same replacement in a commercial building involve different unit sizes, different connection requirements, and sometimes different access conditions. We scope each job individually on the call so the price reflects what is actually involved at that address, not a flat rate based on property type.
Describe what is going on with the plumbing at your property and we will take it from there. We handle the full range of residential and commercial plumbing work across Union City and Fulton County, seven days a week from 5:30 AM to 9:30 PM.
Call (943) 292-8789, answer a few questions, and we will have a price and a time on the schedule before you hang up.
Drain and sewer work covers these nearby towns as well: South Fulton, College Park, East Point, Riverdale, Forest Park. Take a look at our coverage list.
Every plumbing job we take on starts with a clear scope and a confirmed price before anything is scheduled. Whether the call is about a slow drain, a water heater that stopped working, or a sewer line that needs attention, we handle the full range of residential and commercial plumbing work across Union City and Fulton County. The table below lays out what each service covers, who it fits best, and what is worth knowing before you call. We are available seven days a week from 5:30 AM to 9:30 PM.
| Service | What It Covers | Typical Situations | Worth Knowing |
|---|---|---|---|
| Drain Cleaning & Clog Removal | Fixture and branch line clearing, Main line cleaning, Hydro jetting for stubborn buildup, Recurring clog diagnosis | Homeowners and property managers dealing with slow or completely clogged drain | Hydro jetting clears the full diameter of the line, not just a path through the clog, making it the better call for grease buildup or repeat blockages |
| Faucet & Fixture Installation | Faucet replacement, Sink installation, Outdoor hose bib repair, Fixture upgrades during remodel | Homeowners updating fixtures, landlords turning over units, and remodel projects needing rough-in or finish work | Fixture installation during a remodel needs to align with the rough-in before walls close, so timing the call early matters |
| Water Heater Repair & Replacement | Tank and tankless diagnosis, Element and thermostat repair, Full unit replacement, Tankless installation | Anyone with no hot water, inconsistent temperature, or a tank that is leaking or past its service life | We give a straight answer on whether repair or replacement makes more sense before any work is scheduled |
Call (943) 292-8789 and describe what is going on. We will scope the situation, give you a rate, and get it on the schedule.
(943) 292-8789